Powered by

# Deiteris' W Okada Fork

Last update: May 5, 2025

# Introduction

  • W-Okada is a voice changer that uses RVC for its conversion.

  • There are two versions of this voice changer, the offical mainline one and the Deiteris fork.

  • This guide will be about the Deiteris fork since it has better preformence and quality.

  • RVC does NOT mean realtime voice changer.

# Is The W-Okada Deiteris Fork Safe?

RVC Models are PyTorch Models, a Python library used for AI. PyTorch uses serialization via Pythons' Pickle Module, converting the model to a file. Since pickle can execute arbitrary code when loading a model, it could be theoretically used for malware, but Wokada Deiteris Fork has a built-in feature to prevent code execution along the model. Also, HuggingFace has a Security Scanner which scans for any unsafe pickle exploits and uses also ClamAV for scanning dangerous files.

# System & Hardware Requirements

  • Windows 10 or Later
  • macOS 12 Monterey or later. With Apple Silicon or Intel CPU
  • Any Linux Distro

and

  • At least 6GB of RAM
  • At least 6GB of free disk storage
# For GPU-conversion

TLDR: Make sure you have Nvidia RTX 20xx or AMD Radeon RX 5xxx or better. GTX 10xx or RX 580 will also work, but may run into issues with games and higher delay. If you have an iGPU (mostly AMD Radeon Graphics or Vega) use online hosted alternative instead.

Long answer:

Minimum:

  • An integrated graphics card: AMD Radeon Vega 7 (with AMD Ryzen 5 5600G) or later; with 2GB VRAM (in FP32 mode), ~1GB VRAM (in FP16 mode, if supported). But this is NOT recommended at all and we will most likely not recommend you to download the voice changer with iGPUs.

  • A dedicated graphics card: Nvidia GeForce GTX 900 Series or later, or AMD Radeon RX 400 series or later, or Intel Arc A300 series or later.

Recommended:

  • A dedicated graphics card Nvidia GeForce RTX 20 Series or later, or AMD Radeon RX 5000 series or later, or Intel Arc A500 series or later.
# For CPU-conversion

TLDR: don't bother. You can't run games, discord usage might be the only thing that will work decently, but you might potentially damage your CPU. People with no GPU usually have old CPU's, so delay will be high too. Not worth it.

Minimum:

  • Intel Core i5-4690K or AMD FX-6300.

Recommended:

  • Intel Core i5-10400F or AMD Ryzen 5 1600X.

# Online Alternatives [Colab/Kaggle]

# Colab

Go here

Then run all the needed cells one by one, create an ngrok account which is for free. After you started "server ngrok", an URL will be created - you open that URL, and that's where the voice changer will be on.

# Kaggle

Go here

It has a rough tutorial included, needs cell phone number verification and longer to set up, but once you have it, it is worth it. On Kaggle there should be an option to import from Colab, which would be the fastest way to set it up

# Virtual Audio Cable

# A Virtual Audio Cable (VAC) is what you need to use the voice changer on Discord & Games.

  • Run setup64, not 64a, after extracting the zip to a new folder

  • After installing the Virtual Cable, it changes your default audio system. Click Yes when it asks you to open the audio device settings (or press WIN+R, type "mmsys.cpl" if you closed it already), and change your Recording and Playback devices back to your usual devices. Same for communications device aswell (right click -> set as default communication device)

# Windows

  • Download based on your GPU. You don't know what GPU you have? Open Task Manager > Performance tab and check for your GPU0 and GPU1 names. Prioritize the Nvidia one if you have one, else use the other.
image

#

# Download NVIDIA on Windows

# Download NVIDIA RTX 5000-series on Windows

  • NVIDIA RTX-5000 series, the newest release of GPU's, require a separate download. You do not need it if you have an older GPU, follow the normal Nvidia link in that case. nvidia-5000-Series (click here to download)

# Download AMD, INTEL and CPU on Windows

# Opening on Windows

  • First Make sure you have 7zip or WinRAR for extracting / unzipping.

  • After the download, you extract the zip file. You open the folders until you see an exe application called MMVCServerSIO and run that.

  • If nothing opens after a while of codes loading in, then open a browser and type in http://127.0.0.1:18888/. This is a local URL, it runs on the WebUI.

# Mac

# Download Mac Silicon

# Download Mac Intel

# Opening on Mac

  • Double click the voice-changer-macos-arm64-cpu.tar.gz file. The voice changer will unpack and the MMVCServerSIO folder will appear.

  • Open the extracted MMVCServerSIO folder.

  • Double-click MMVCServerSIO to run the voice changer.

# Linux

  • For NVIDIA, you need to download both these files:

https://github.com/deiteris/voice-changer/releases/download/b2332/voice-changer-linux-amd64-cuda.tar.gz.aa

https://github.com/deiteris/voice-changer/releases/download/b2332/voice-changer-linux-amd64-cuda.tar.gz.ab

  • For AMD, you need to download both these files:

https://github.com/deiteris/voice-changer/releases/download/b2332/voice-changer-linux-amd64-rocm.tar.gz.aa

https://github.com/deiteris/voice-changer/releases/download/b2332/voice-changer-linux-amd64-rocm.tar.gz.ab

Install portaudio with sudo yum -y install portaudio. Installation of CUDA Toolkit or AMD HIP SDK is NOT REQUIRED. All other necessary libraries are bundled with the application. I'm not sure about the capabilities of UI tar archive extractors, but you can extract these archive parts with the following command that will merge them and extract: cat voice-changer-linux-amd64-cuda.tar.gz.* | tar xzf - (change cuda to rocm if necessary).

# Opening on Multi-PC Setups

  • Create a file named .env on the same folder where MMVCServerSIO.exe is located. Open it up with a notepad, copy paste the settings from the GitHub link.

  • After that, you create another file with the file extension ending .bat, open it up with a notepad, copy paste what is needed in there again from the GitHub link.

  • Now run the bat file. After it starts, you should be able to open the link. For example, if you specified HOST=192.168.0.1 and ALLOWED_ORIGINS='["https://192.168.0.1:18888"]'), you should be able to open https://192.168.0.1:18888 in your browser and use the voice changer UI from other machines in your local network.

# Voice Models

# Adding Models

image
#
  • Click on Edit on the small blue square located around the the top left side
  • Pick any slot you want, click upload
  • Only RVC models will work. If you have a gpt-sovits one or any other, they will not work.
  • Select Type: RVC, then select file on the Model slot and upload your .pth file.
  • No need for an Index file, but you can upload it. This controls the accent of the voice model

# Deleting Models

If you wish to delete a model, you can overwrite the slot with a new model. If you insist on fully emptying a slot for whatever reason, head over to the model_dir folder, open the folder of the slot number you want to delete, and delete the model from that folder

# Audio Setup

# Discord & Games

On the voice changer app wokada, you select:

  • Input: Your microphone
  • Output: Virtual Cable
  • Monitor (if you wish to hear the voice changer on your headphones aswell): Your headphones

On discord and games, you select:

  • Input: Virtual Cable
  • Output: Your headphones

For Linux, read the Virtual Cable step

# Client and Server Setup

Audio: CLIENT

  • Uses MME (normal audio processed through windows. You use this automatically with every application)
  • You can use the boxes echo, sup1, sup2 using this

Audio: SERVER

  • Use S.R. 48000
  • I recommend using [Windows WASAPI] on all prefixes for less delay, because this uses your audio devices (e.g. microphone) directly, before processing through windows.
  • Both Input and Output has to be the same (Windows WASAPI), you can't use MME for input and then Windows WASAPI for Output. You may also use ASIO.
  • You can not use the in-built noise suppressions in this mode

ASIO > WASAPI > MME as a general thumbrule (this also affects delay)

Sometimes Client does not work, then use SERVER with prefix "MME" or "Windows WASAPI". You can not use the in-built noise suppression and echo fix if you use SERVER.

# Settings Explained

  • PASSTHRU button: Sends your actual voice and not the voice changer through the virtual cable. You want this to be GLOWING GREEN or GREY (grey for dark mode users) for the voice changer to work.

  • F0 det: Pitch algorithm. Don't use crepe because a youtube tutorial guy told you to, recommended settings are down below on this guide.

  • Chunk: Controls the delay (lower number means less delay, but please check out the recommended settings for what your GPU is capable of).

  • Extra: Controls voice model quality. 2.7s is the max, anything above is not worth it and can cause issues for no benefit.

# VOL:

  • in: This raises the microphone volume before it goes into the voice changer (Recommended to leave it on the default or if needed, not to go too high, else it increases background noise and makes the voice sound worse).

  • OUT: Raising voice changer volume on the output.

  • MON: Increases volume of your headphones that you set on "mon" if you selected to hear yourself with the voice changer.

  • Pitch: This is the pitch. Going into negative will make it lower pitch, going higher will make it higher pitch. If you have a male voice using a female voice, aim for 10 - 14, this depends on your voice, try around those numbers until you find a sweet spot.

  • Formant Shift: Alters harmonic frequencies and changes the voice timbre without affecting the pitch

  • Index: This controls the accent of the voice model. In most cases, using Index on Realtime Voice Changer can add an autotune-like sound. If you have a heavy foreign accent, you may use this at a low rate. Beware, this increases CPU/GPU usage

  • In. Sens: microphone threshold, increasing this will cause less background noise to get picked up if it's a problem

  • Sup2: Noise suppression on your microphone.

  • Sup1: Noise suppression but weaker, not recommended to use this at all, because it barely has any impact whilst reportedly, making the voice inconsistent

  • Echo: if you experience echo issues despite having sup2, In. Sens to the right and having lowered your windows system value, then this will help you as a last resort

# Settings

# Advanced Settings

  • Protocol: rest
  • Crossfade length: 0.1 or 0.15 (0.1 for fastest voice, 0.15 for improved quality but increases delay by 50 ms. It is NOT recommended to go below 0.1)
  • SilenceFront: Reduce GPU usage when idle. This only reduces GPU resources when you're not talking or making sounds
  • Force FP32 mode: on (THIS IS OFF BY DEFAULT! Turning this on improves stability. Increases VRAM usage by 200 MB)
  • Disable JIT compilation: off for faster loading speed of the program, on for slightly better performance (10-15 ms) for Nvidia only)
  • Convert to ONNX: Reduces delay and slightly reduces gpu usage. Enabling this increases CPU usage by around 5-10%. Reduces the quality of the voice a bit. If you decide to enable this, pair it with rmvpe_onnx for even less delay
  • Protect: Reduces the occurrence of robotic sibilants and robotic breathing, but also reduces the effect of the index file. Lower values increase this protection, higher values decrease it. The default value is 0.5, which means that the protection is disabled, reduce this value to 0.33 to enable it

# Finding my own settings for Chunk

First start with 500 ms, check what number your perf is and go closer to that number but not lower.

Example: if your perf is 200, go down to 250 with your chunk. Chunk affects perf value, and Extra as well.

image

If your perf value is green, your selected chunk is stable. You can experiment and go down in chunk for less delay, or increase extra for more quality (would not recommend to go above 2.7s extra. Anything above uses more resource for no clear benefit).

image

If your perf value is yellow, your selected chunk is enough, but audio may be unstable if you run other processes at the same time. Operation in this range will also incur high GPU usage. Increasing Chunk size or reducing Extra is recommended.

image

If your perf value is red, the voice changer is unstable. Increase chunk size or reduce Extra.

# Known working settings for Chunk and Extra

GPU
Max Settings
For gaming

RTX xx90 (e.g. 3090)

RTX xx80 Ti (e.g.3080 Ti)

RTX xx80 (e.g. 3080)

RTX xx70 Ti (e.g. 3070 Ti)

RTX xx70 (e.g. 3070)

RTX xx60 Ti (e.g. 3060 Ti)

RTX xx60 (e.g. 3060)

RTX xx50 (e.g. 3050)

GTX 16xx-series

GTX 10xx-series

GTX 900-series

MX 330

30 - 60 ms chunk + 2.7s extra

30 - 60 ms chunk + 2.7s extra

100 - 120 + 2.7s extra

50 - 80 ms chunk + 2.7s extra

50 - 80 ms chunk + 2.7s extra

50 - 90 ms chunk + 2.7s extra

60 - 90 ms chunk + 2.7s extra

110 - 130 ms chunk + 2.7s extra

140 - 180 ms chunk + 2.7s extra

200 ms chunk + 2.0s extra

250 ms chunk + 1.0s extra

500 ms chunk + 0.6s extra

perf number + 40 ms chunk

perf number + 40 ms chunk

perf number + 40 ms chunk

perf number + 40 ms chunk

perf number + 40 ms chunk

perf number + 40 ms chunk

perf number + 50 ms chunk

perf number + 60 ms chunk

perf number + 60 ms chunk

perf number + 80 ms chunk

perf number + 80 ms chunk

perf number + 100 ms chunk
GPU
Max Settings
For gaming

7xxx XT cards

6xxx XT cards

5xxx XT cards

7xxx cards

6xxx cards

5xxx cards

RX 6600M

RX 580

RX 570

RX 560

60 - 80 ms + 2.7s extra

70 - 100 ms + 2.7s extra

80 - 120 ms + 2.7s extra

bugged 256 ms + 2.7s extra

128 ms + 2.7s extra

140 - 200ms + 2.0s extra

128ms + 2.7s extra

perf number + 60 ms chunk

perf number + 60 ms chunk

perf number + 60 ms chunk

perf number + 40 ms chunk

perf number + 40 ms chunk

perf number + 40 ms chunk

perf number + 60 ms chunk

perf number + 60 ms chunk

perf number + 60 ms chunk

perf number + 60 ms chunk

perf number + 60 ms chunk

perf number + 60 ms chunk

perf number + 80 ms chunk
GPU
Chunk + Extra

AMD Radeon(TM) Graphics (with Ryzen 7 5800H)

AMD Radeon RX Vega 10 (with Ryzen 7 3700U)

AMD Radeon RX Vega 8 (with Ryzen 3 3200G)

256 ms + 2.7s extra

600 ms + 0.6s extra

700 ms + 1.0s extra
Mac and CPU
F0 + Chunk + Extra

Mac M1

Mac M1 Air

Mac M2

Mac M2 Air

Ryzen 7 5800x

fcpe ; for chunk check the perf number and add 50 to it ; 1.0s extra

fcpe + 230ms + 2.7s extra

rmvpe_onnx + 650ms + 1.0s extra

fcpe ; for chunk check the perf number and add 50 to it ; 2.7s extra

rmvpe_onnx + 260 ms + 0.6s extra

# Extras

# Information

# Reduce more Delay

# Models to try

  • You will need to connect your account to weights.gg to be able to download these models
    • Click on the 3 dots (...) on weights.gg models, then Download model.

Female:

Duckus Egirl voice made by lusbert

Psych2Go voice made by dan

Male:

Bob Ross voice made by dieseldog34

Markiplier voice made by hobqueer

# Help

After you start the program for the first time and it finished downloading files: if it says Failed to download or verify: ... followed by "Press Enter to continue" at the end, then the pretrain download failed. This can happen randomly. Here is what you will need to do:

# Crackle Fix

Open Task Manager > Details

Right click audiodg.exe and set priority to High

Right click audiodg.exe again > set affinity > uncheck everything except CPU 2 (only ✅ CPU 2, turn off the rest)

With a program called ProcessLasso you can automate this to always be active, since Windows resets these sometimes. Or you can open up CMD/Powershell (or make a bat file) and type in:

powershell "ForEach($PROCESS in GET-PROCESS audiodg) { $PROCESS.ProcessorAffinity=4; $PROCESS.PriorityClass='High' }"

# Discord Crackle Fix

Make sure to do the Crackle Fixes in this step before doing this to see if it fixes your issue

If the voice sounds fine in the app AND it sounds fine in games, but ONLY sounds weird on discord, then:

  • Turn off Echo Cancellation
  • Turn off Noise Suppression (sometimes causes issues, maybe not. Check for yourself)

# GPU Idling

Sometimes your GPU will start idling after the program is in the background for a while and affect performance.

  • In the folder where w-okada is located there should be a .bat file called force_gpu_clocks.bat, run that and it should fix your gpu idling.
  • Once you no longer want your gpu clock speed to be forced anymore you can run reset_gpu_clocks.bat.

# FAQ

# Why does it run in a browser and not it's own window?

Because it uses a Web User Interface (WebUI) coded in JavaScript & TypeScript, the majority of AI programs are designed to run on the browser since it can be used both on cloud and locally (on your pc), and it can also resolve some performance issues. The original wokada also ran on a WebUI, just that it made it's own window

# What browser should I use?

It's better you try and test, some people had issues on Chrome, some others on Firefox, it might depend on the settings you use and also Java/Type Script having issues. The browser that usually is reported by most people to have issues is OperaGX, which is why we don't suggest it much

# Why are most YouTube (Video) Tutorials old? Is there going to be an updated one?

YouTube Tutorials take way more time to make, and get outdated easily in this case, as AI progresses fast and continues to change in better, with more different settings and versions. Written guides are easier to update, since you don't have to remake an entire video. It's unknown if we will ever release a video since they easily get outdated, but if we will, it will be linked inside of this guide.

# Do I need an extremely expensive mic for good quality?

We had a conversation about this in https://discord.com/channels/1159260121998827560/1159290161683767298/1352325982689951765 & https://discord.com/channels/1159260121998827560/1159290161683767298/1356265862704926907, RVC works by downsampling your audio voice to 16khz because f0 estimators only works at that sample rate, after that the model outputs the results using it's original sample rate (without any upscaling). So there won't be the need of having a super extremely expensive, a decent one should do the job.

# ‎

# You have reached the end.

Report Issues

© Copyright 2025. All rights reserved.